News

Home/News/Details

Do You Know About Shielding Cover?

Shielding cover is a tool used to shield electronic signals. Its function is to shield the influence of external electromagnetic waves on internal circuits and the radiation of electromagnetic waves generated internally.
Composition and application The shielding cover consists of legs and a cover body, and the legs and the cover body are movably connected; the cover body is in the shape of a spherical crown.
This component is mainly used in mobile phones, GPS, and other fields to prevent electromagnetic interference (EMI) and shield components and LCM on PCB boards.
The material of the shielding cover is generally 0.2 mm-thick stainless steel and nickel silver, among which nickel silver is a metal shielding material that is easy to tin. The design of the suction cup should be considered when using SMT patches.
Material application: Shielding frames generally use Cu-C7521-H [general material], Cu-C7521-OH [soft material, for deep drawing] (nickel-nickel-zinc alloy, nickel-zinc alloy), Nickel Silver), t=0.2, 0.3mm; shielding covers generally use stainless steel SUS304R-1/2H [bending processing], SUS304R-1/4H [for deep drawing], t=0.15, 0.2mm, tin-plated steel strip (tinplate), etc.;
For welding on PCB, nickel-nickel-zinc alloy and tinplate can be used, and nickel-nickel-zinc alloy is recommended, mainly because nickel-nickel-zinc alloy is better in welding, heat dissipation and steam.
Design considerations: The tray for placing the shielding cover has too much space for movement, which makes it easy to swing during patching, failing to absorb. The material must be placed in the tray with a space of about 1.0 mm. If it is too large, the material will swing, and if it is too small, the material may not be taken up.
The size of the pick-up point of the shielding cover should be appropriate, and the pick-up point should be in the middle of the material as much as possible. The size of the pick-up point is preferably Φ6.0mm. The larger the pick-up point, the higher the stability of the patch and the higher the efficiency.
Magnetic shielding material is used to shield the magnetic field. There are three types of magnetic shielding: static magnetic shielding, low-frequency electromagnetic shielding, and high-frequency electromagnetic shielding. In practice, different shielding materials are selected according to different situations.
Static magnetic shielding: To concentrate the stray magnetic field on the shielding cover shell, the shielding cover should have the highest possible magnetic permeability. In principle, all soft magnetic materials with high magnetic permeability, such as electromagnetic pure iron, ductile iron, Permalloy, silicon steel, soft magnetic ferrite, etc., can be selected. The design should be selected after comprehensive consideration of magnetic screen requirements, price, shell strength, processing performance, etc.
Low-frequency electromagnetic shielding: In addition to shielding static magnetism, it is also necessary to shield changing electromagnetic fields. Such as industrial frequency electromagnetic fields. In addition to requiring high magnetic permeability, high electrical conductivity is also required. The ideal material is Permalloy. Considering the price and processing factors, the large shielding cover is preferably made of electromagnetic pure iron. When the nickel content in Permalloy is higher than 40%, the magnetic permeability and electrical conductivity are very good. In addition, iron-aluminum alloy containing about 15% to 16% aluminum is also a commonly used magnetic shielding material.
High-frequency electromagnetic shielding: The main purpose is to shield electromagnetic waves. The principle of shielding is Lenz's law. The induced electromagnetic field in the shielding cover is used to offset the external electromagnetic interference. Good conductors should be used to make the shielding cover, such as aluminum and copper.
Shielding effect Shielding is a device method in electrical engineering. To prevent the external electric field, magnetic field, or electromagnetic field from interfering with the internal equipment or to avoid the influence of the electromagnetic field of the equipment on the outside, the equipment is placed in a closed or nearly closed metal shell or metal mesh cover. This metal shell or mesh cover is called a shielding cover. In structural chemistry, the word shielding is borrowed to name the following effects. The repulsion of the inner electrons in the atom to the outer electrons reduces the effective attraction of the nucleus to the outer electrons, which is equivalent to the inner electrons "shielding" a part of the nuclear charge, so it is called the shielding effect. The size of the shielding effect between electrons can be approximately expressed by the shielding coefficient.
The prevention and control methods of electromagnetic radiation pollution refer to scientific and technological methods to prevent or protect against electromagnetic radiation interference and damage. Artificial electromagnetic pollution sources include pulses, discharges, power frequency alternating magnetic fields, radio frequency electromagnetic radiation, etc. Natural electromagnetic pollution is mainly the interference caused by lightning, volcanic eruptions, earthquakes, and solar magnetic storms on shortwave communications. The protection principle is mainly to place electromagnetic shielding devices in the path of electromagnetic transmission to reduce harmful electromagnetic fields to an allowable range. The shielding device is a closed shell made of metal materials. According to different objects and requirements, different structures of protective covers are used: ① For the protection of interference from small instruments or devices, a copper-aluminum dense shell is used as a shielding cover. ② For low-frequency electromagnetic interference, a shell is made of magnetic materials such as iron or beryllium-molybdenum alloy. ③ For the protection of interference from precise electromagnetic measurements at low temperatures, a superconducting material shielding cover is used. ④ For the protection of large units or control rooms, a hexahedral shielding room is made of copper or steel plates. ⑤ For personal protection, work clothes, helmets, and goggles made of shielding materials with copper wire or microwave absorbing materials in the interlayer are used. The comprehensive prevention and control measures and countermeasures are mainly: ① Rational industrial layout to keep electromagnetic pollution sources away from densely populated areas. ② Improve electrical equipment to reduce pollution to the surrounding environment. ③ Implement remote control and telemetry to reduce the chances of workers being exposed to high-intensity electric fields and prevent harm to the body. The basic function of electromagnetic pollution prevention and control is to improve the stability and reliability of electronic instruments and electrical equipment in strong electromagnetic interference environments and reduce the effects and hazards of high-intensity electromagnetic radiation on the human body.