Radiation emissions after connecting cables to shielded cabinets
1. Reasons for the reduced shielding effectiveness of on-site shielding cabinets
Cable is the main factor causing electromagnetic compatibility issues in the system. In electromagnetic compatibility testing, it is common to encounter situations where the equipment cannot pass the electromagnetic compatibility test despite any improvement, but the equipment can pass the test smoothly when the external cable of the equipment is removed; In practical use of electronic devices, it is also common to encounter situations where the device cannot function properly or even crashes frequently, but everything is normal after unplugging the connecting cable. In fact, most of the electromagnetic compatibility problems we encounter in reality are caused by cables.
The shielded cabinet can meet the strict requirements of the standard when not connected to any cables in the laboratory, but it often only has a shielding efficiency of about 50dB or even completely ineffective in use on-site. This is because the cable was incorrectly connected to the cabinet on site, and the shielding effectiveness of the cabinet returned to normal after the connecting cable was unplugged. This indicates that cables are the direct cause of reduced system shielding effectiveness. In fact, the cable is an efficient receiving and transmitting antenna, and if improperly connected, it can directly transmit electromagnetic leakage signals from the cabinet. In the case that the non shielded twisted pair is directly connected to the shielded cabinet, it is equivalent to directly connecting a transmission antenna to the shielded cabinet, which will completely lose the shielding effect of the shielded cabinet. Therefore, this error must be avoided in actual use.
2. Radiation model of shielded cabinet connecting cables
The differential mode current circuit is the signal current circuit in the cable, while the common mode current circuit is formed by the cable and the ground.
The mathematical analysis of this model can be found in many EMC books. I will not do this part of work here, just use its conclusions. This model is equivalent to two current loop antennas, and its transmission capacity is proportional to the loop area and the magnitude of the current in the loop. In fact, shielded twisted pair is used in secret related networks. The cable contains signal wires and signal ground wires. The distance between the two is very small, and the area of the differential mode current loop formed by the two is also very small, so its differential mode radiation is not strong. In addition, due to the opposite direction of current in adjacent hinges, the magnetic field generated by them also has the opposite direction, which cancels out in space. Therefore, the actual radiation generated mainly comes from common mode radiation.
Common mode radiation is generated by common mode current, and the loop of common mode current is formed by the cable and the earth, with a large loop area and strong radiation. Common mode current is generated by common mode voltage, which is the voltage between the cable and the ground. There are many reasons for this voltage. In the case of using shielded cabinets, the generation of common mode voltage mainly comes from the electromagnetic leakage emission of equipment inside the cabinet on the cable and the capacitive and inductive coupling in the circuit.
Analysis Of Radiation Emission After Connecting Cables To Shielded Cabinets
Jun 01, 2023
Previous: Overview Of Shielded Cabinet Usage
Next: No Information
Send Inquiry
Latest News
-
Construction Of Jiangsu Tenyen Shielded Test Hall In Moscow, Russia Is Underway06 Nov, 2026 -
Construction Of TBEA Xi’an New Energy Double-Layer Shielded Laboratory Project Is In Progress15 Oct, 2026 -
Anxin Wishes You A Happy New Year 2026!10 Feb, 2026 -
Christmas Greetings From Wuxi Anxin Shielding Equipment Co., Ltd.24 Dec, 2025
